Ingersoll-Rand ETA2, ETA5 manual Measure Mode Up to 200 readings stored

7529_eng.fm Page 14 Wednesday, November 12, 2003 8:57 AM

Measure Mode (Up to 200 readings stored)

To start, press		On
Press	MENU
Press	2 (measure)
Plug in transducer; press			Enter

select proper transducer using

then press Enter

If using I/S or H/O type transducers continue with instructions.

If using SER, KPD or KEY, you are now ready to take measurements.

Select units of measure using	; press	Enter
Select Peak, Track, Impulse or ‘Click Dip’ using		; press Enter

Use Peak for direct drive tools, Track for diagnostics, Impulse for pulse tools, and ‘Click Dip’ for click wrenches.

Select measurement direction using		(Right is clockwise. Left is anti-clockwise);
press Enter
Select ‘Cycle end Time’ using		; press	Enter (normal is 0.5 sec.)
Select frequency response using		; press	Enter
Type in Max torque value; press	Enter
Type in Min torque value; press	Enter

14