Ingersoll-Rand ETA2 To Store Data by Master Round, To return to the main menu, press Menu Menu

7529_eng.fm Page 28 Wednesday, November 12, 2003 8:57 AM

To Store Data by Master Round

At main menu, press

Press

3(Store)

3(Master Round)

If you are using an Ingersoll-Rand TRD, TSD or Crane UTA type transducer and it is already plugged in, you are now ready to take readings. The job that appears on screen will be the job that you selected to be first when you set up the master round.

If you are using any other type of transducer or it is not yet plugged in, you will be prompted to

insert transducer and select transducer to be used. Plug in transducer and press		Enter
To return to the main menu, press MENU MENU
Note: You can erase the last reading taken by pressing	Reset	. If you have
selected Horizontal sampling and the ETA5 has already switched to
the next job, it will switch back when you press	Reset .

It is not possible to erase any readings other than the last one taken in Horizontal sampling mode.

If the characteristic has been configured with Subgroup comment size set to a value other than 0:

Pressing	Z will allow a subgroup comment to be entered.
Pressing	# gives analysis of last completed subgroup. (Press	# again to
continue.)
Pressing	. gives analysis up to current subgroup. (Press .	again to continue.)

28