2
PLACING ANALYZER IN SERVICE
•Always install, operate, inspect and
maintain this product in accordance
with all applicable standards and
regulations (local, state, country, fed-
eral, etc.).
•Keep work area clean, uncluttered,
ventilated and illuminated.
•Do not remove any labels. Replace
any damaged label.
USING THE ANALYZER
•Always wear eye protection when oper-
ating or performing maintenance on
this tool.
•Always use Personal Protective Equip-
ment appropriate to the tool used and
material worked. This may include dust
mask or other breathing apparatus,
safety glasses, ear plugs, gloves,
apron, safety shoes, hard hat and other
equipment.
•Keep others at a safe distance from
your work area, or ensure they use
appropriate Personal Protective Equip-
ment.
•This tool is not insulated against elec-
tric shock.
•This unit is for indoor use only.
•Store idle units. When not in use, units
should be stored in a dry, high or
locked location, out of the reach of chil-
dren.
•Power tools can vibrate in use. Vibra-
tion, repetitive motions or uncomfort-
able positions may be harmful to your
hands and arms. Stop using any tool if
discomfort, tingling feeling or pain
occurs. Seek medical advice before
resuming use.
•Keep body stance balanced and firm.
Do not overreach when operating this
tool. Anticipate and be alert for sudden
changes in motion, reaction torques, or
forces during start up and operation.
•Ensure work pieces are secure. Use
clamps or vises to hold work piece
whenever possible.
•Never use a damaged or malfunction-
ing tool or accessory.
•Maintain unit with care. Keep unit clean
for better and safer performance. Fol-
low instructions for changing accesso-
ries. Inspect unit cords periodically and
if damaged, have them repaired by an
authorized service facility.
•Do not operate this product in explo-
sive atmospheres, such as in the pres-
ence of flammable liquids, gases or
dust.
•Do not modify this product, safety
devices, or accessories.
•Do not use this product for purposes
other than those recommended.
•Use accessories recommended by
Ingersoll-Rand for your model.
•Don’t abuse the cord. Never use the
cord to pull the plug from an outlet.
Keep cords away from heat, oil, sharp
edges or moving parts. Replace dam-
aged cords immediately.
•Avoid body contact with grounded sur-
faces such as pipes, metal structures
or other electrical products.
•Stay alert, watch what you are doing
and use common sense when operat-
ing this product. Do not use this prod-
uct while tired or under the influence of
drugs, alcohol, or medication.
•Do not use this product near water or
other liquids.
•Do not attach or place external loads
on any part of the unit.
•Replace battery with the same or equiv-
alent type recommended by the battery
manufacturer. Observe correct polarity
when installing battery. Dispose of
used batteries according to battery
manufacturer’s instructions.
7529_eng.fm Page 2 Wednesday, November 12, 2003 8:57 AM