Ingersoll-Rand ETA2, ETA5 To Communicate with a PC using PC Comms Software

Settings in the order they appear when the Software Reset Menu is accessed.

Cm max samples - type in the required figure

Cm min samples - type in the required figure

Language - select using

Autoprint mode - select using

Capability label - select using

Cpk Calculation - select using

Circle-store (On/Off) - select using

Shift key mode - select using

To Communicate with a PC

Connect ETA5 to PC via cable provided

On PC, start PC Comms

On ETA5:

Press

Press , then press

You can now setup and view all information/data via the PC

Note: This optional PC software is used primarily to write and store

characteristics and rounds on the PC. The format of the data

stored on the PC is of little use to the computer operator without

further processing.

7529_eng.fm Page 44 Wednesday, November 12, 2003 8:57 AM