7529_eng.fm Page 1 Wednesday, November 12, 2003 8:57 AM

04578092

Form P7529 Edition 1 January, 2002

OPERATORS MANUAL FOR

MODEL ETA2 AND ETA5 ANALYZERS

This ETA Analyzer is used for calibration or data collection of torque tools, power and hand operated, using external transducer(s). This Analyzer can also be used for joint development and as a failure analysis instrument (using external transducers).

Ingersoll-Rand is not responsible for customer modification of units for applications on which Ingersoll-Rand was not consulted.

This symbol is to alert the user and service personnel to the presence of important operat- ing instructions that must be read and understood to prevent personal injury, electrical shock or damage to the equipment.

IMPORTANT SAFETY INFORMATION ENCLOSED -

SAVE THESE INSTRUCTIONS.

READ AND UNDERSTAND THIS MANUAL BEFORE OPERATING THIS PRODUCT.

IT IS YOUR RESPONSIBILITY TO MAKE THIS SAFETY INFORMATION

AVAILABLE TO OTHERS THAT WILL OPERATE THIS PRODUCT.

FAILURE TO OBSERVE THE FOLLOWING WARNINGS COULD RESULT IN

ELECTRIC SHOCK, FIRE AND/OR SERIOUS PERSONAL INJURY.

Refer All Communications to the Nearest Ingersoll-Rand

Office or Distributor.

© Ingersoll-Rand Company 2002

Printed in U.S.A.

Page 2
Image 2
Ingersoll-Rand manual Operators Manual for Model ETA2 and ETA5 Analyzers