22 EN, Setup of JVC Original Software | JVC MP-XP7210GB specification

22 EN

JVC ORIGINAL SOFTWARE AND SYSTEM APPLICATIONS

JVC ORIGINAL SOFTWARE

To use the JVC original software, you must set it up in the "Original Software Setup Procedure" given below. You can setup the following software programs.

Setup software

•CC converter (See Page 25.)

•JVC’s DVC (Digital Video Camera) utilities

Tips

•The JVC’s DVC utilities are USB drivers dedicated to GR-DV3000EK, DV2000EK, DVP7EK and DVP3EK systems. If you are using any of these DVC’s, you can use it without uploading its USB driver from the DVC’s CD-ROM disk.

•For DVC connection and operations, see its instruction manual.

Setup of JVC Original Software

Before starting the software setup, quit and save the currently active application if any. Otherwise, your working data will be lost.

1.Click [start] and click [Run first] at the right lower end of the Menu.

The "Preparing to Install... " screen will appear, and the software setup will start up.

2.Read the License Agreement when displayed.

If you accept the Agreement, click [Yes]

3.During setup, the "Sound, video and game controllers has not passed Windows Logo testing to verify its compatibility with Windows XP." message may be displayed. Ignore it as it does not affect the system operation. Click [Continue Anyway] to continue software setup.

Image 22

JVC MP-XP7210GB warranty 22 EN, Setup of JVC Original Software, Read the License Agreement when displayed, Setup software

Contents

MP-XP7210GB/MP-XP3210GB Dear Customer It is recommended that you Some DO’S and DON’TS on the Safe USE of Equipment Important Safety Instructions EN5 About Batteries Checking Inventory Restriction JVC Software License AgreementCopyright Ownership Grant of License Transfer of the Software Term Limited WarrantyLimitation of Liability Termination END-USER License Agreement Copyright Ownership 10 EN Restricted Rights Legend Table of contents 12 EN Parts and Component Names Setting UP ¡ Mounting Battery Pack ¡ Dismounting Battery Pack Unplug the jumper pin before recharging the battery packMounting/Dismounting the Lithium Ion Battery Pack 14 EN Open the display panel 16 EN Make sure that the battery pack is fully charged¡ Make sure that the battery pack is fully recharged Standard recharging time Turning On/Off Key On ¡ Status indicatorsPress the On/Off key Rename your computer and click Next Initial Setup of Microsoft Windows18 EN Click Next Enter the user name and click Next Click Finish Click start 20 ENTurn-Off Click Turn Off computer JVC Original Software and System Applications Setup software Setup of JVC Original SoftwareRead the License Agreement when displayed 22 EN DVC’s USB Drivers If The hardware JVC DV Camera Storage message appears 24 EN If The hardware JVC Web Camera message appears CC Converter ¡ Enable¡ Disable Explanation of menu options 26 EN ¡ Pixela ImageMixer ¡ Acrobat Reader ¡ Norton AntiVirus¡ Real Player 8 Basic To Uninstall a Standard Application To Set Up the Standard Applications Again28 EN Navigate in the Internet World 30 EN Contracting with the Internet Service Provider¡When you have contracted with a provider ¡ Contract with the provider Connection of Telephone Line and Modem Setup 32 EN Seting up the modem Internet Connection Setup 34 EN Click Set up my connection manually option, and click NextClick Connect using a dial-up modem option, and click Next Click Connect to the Internet option, and click Next Click Finish. The setup for connection wizard is complete Enter the phone number, and click Next 36 EN Internet Protocol TCP/IP Properties screen will appear 38 EN Connecting to the InternetClick Connect Disconnection from the Internet Accessing a Web 40 EN Setting up E-Mail Software Click start and click E-mail on the Menu 42 EN Enter the Account name and Password, and click Next Transmission 44 ENSending and Receiving E-mails Create Create a message 46 EN To check the received messages, click Inbox on the screen Hardware Using the Pointing Device 48 EN Drag Double-clickScroll buttons Using the Numeric Keypad Using Hot keys50 EN Increasing the Optional Memory Capacity 52 EN Adding or Removing a Memory Board Mounting a memory board Removing the memory board Checking the Additional Memory Board 54 ENTotal amount of memory appears on the screen Remove the dummy card Using the SD Memory Card SlotInsert an SD memory card Connecting an external monitor Using an External Display Unit56 EN Setting for network connection Connecting to a network¡Setting the IP address manually ¡Setting a computer name or work group 58 EN ¡Checking the MAC address 60 EN Checking the battery level Click the Power Meter tab Power-saving mode 62 EN System in standby status System in halt status 64 EN Unknown partition on hard disk PC Recovery Repeated PC Setup Before starting Repeated PC Setup Setting Up Your PC Again66 EN If you respond with a System Recovery ProcedureSelect the recovery method disk partitioning If you respond with C Computer Wiederherstellung Recovery 68 EN Troubleshooting 70 EN PowerPower does not turn on If the Q&A does not help you Screen has hung Startup and Operation of WindowsTerminating an application forcibly Troubleshooting 72 EN Display ¡ When the Stand By lamp is flashing¡ When the Stand By lamp is not lit PC is turned on but nothing appears on the screen 74 EN Using the Internet¡ When a divider is used Cannot dial up PC dials but connection is not established PC cannot send or receive e-mail messages Check the following ¡ Check the user name and password76 EN ¡ The internal modem dials but negotiation is not made Battery is not charged BatteryBattery discharge faster than expected Miscellaneous Forgot the password78 EN PC is hot Setting procedure does not complete 80 EN Appendix 82 EN List of Support Centres Trademark notice Specification 84 EN Options separately available MP-VGX1E 86 EN Page 88 EN Page Victor Company of JAPAN, Limited