JVC MP-XP7210GB, MP-XP3210GB warranty 52 EN, Adding or Removing a Memory Board

52 EN HARDWARE

Adding or Removing a Memory Board

If you have operated your PC, its inside may be hot and you may get a burn. Turn the power switch off and wait for the PC to cool down.

1.Turn the PC Power switch off, and disconnect AC adapter from your PC. Then, remove the standard lithium ion battery pack (if any) and all other peripherals from your PC.

2.Remove the built-in lithium ion battery pack and the memory expansion cover by taking the following steps.

1)Turn your PC upside down, and remove screws 1 to 4.

2)Remove the built-in lithium ion battery pack.

3)Open the memory expansion cover.

1)

2)

Remove the battery

pack by sliding it 3) in this direction.

Cautions

•Screw 1 (10 mm) is different in length from screws 2 to 4 (3 mm). Using a wrong screw can damage your PC.

•Do not loosen any other screws, otherwise, your PC may fail.

3.Discharge any static electricity from your body by touching something metallic nearby.(Not on the PC)

4.Add or remove a memory board.

Cautions

The MP-XP7210GB PC already has 128M-byte memory in its memory slot. You need to replace it with a 256M-byte memory board to expand the PC memory capacity to the maximum 384M bytes. To do so, remove the 128M-byte memory board from the slot. See Procedure “2) Remove the memory board” on Page 53.