System in standby status, System in halt status | JVC MP-XP3210GB

EN 63

•System in standby status

The built-in battery discharges whilst the PC is in system standby status. As a result, any unsaved data may be lost or the system may not start up. Be sure to turn off the PC when it is not used for a long time.

Under fully charged condition, the unit can maintain the system standby status for the following periods.

1About 10 hours with the built-in battery pack alone

2About 20 hours with the built-in and standard battery packs

•System in halt status

Continued operation on the PC displaying a battery-low warning causes the result as follows:

1 When the halt status is enabled

The PC turns off while maintaining the current data.

2When the halt status is disabled

The PC does not save the current data, which will be lost.

We recommend that you enable the halt status setting. This function is enabled at the factory.

Image 63

JVC MP-XP3210GB, MP-XP7210GB warranty System in standby status, System in halt status

Contents

MP-XP7210GB/MP-XP3210GB It is recommended that you Dear Customer Some DO’S and DON’TS on the Safe USE of Equipment Important Safety Instructions About Batteries EN5 Checking Inventory Transfer of the Software JVC Software License AgreementCopyright Ownership Grant of License Restriction Termination Limited WarrantyLimitation of Liability Term Copyright Ownership END-USER License Agreement Restricted Rights Legend 10 EN Table of contents Parts and Component Names 12 EN Setting UP 14 EN Unplug the jumper pin before recharging the battery packMounting/Dismounting the Lithium Ion Battery Pack ¡ Mounting Battery Pack ¡ Dismounting Battery Pack Open the display panel Standard recharging time Make sure that the battery pack is fully charged¡ Make sure that the battery pack is fully recharged 16 EN ¡ Status indicators Turning On/Off Key OnPress the On/Off key Click Next Initial Setup of Microsoft Windows18 EN Rename your computer and click Next Click Finish Enter the user name and click Next Click Turn Off computer 20 ENTurn-Off Click start JVC Original Software and System Applications 22 EN Setup of JVC Original SoftwareRead the License Agreement when displayed Setup software If The hardware JVC DV Camera Storage message appears DVC’s USB Drivers If The hardware JVC Web Camera message appears 24 EN Explanation of menu options ¡ Enable¡ Disable CC Converter 26 EN ¡ Acrobat Reader ¡ Norton AntiVirus ¡ Pixela ImageMixer¡ Real Player 8 Basic To Set Up the Standard Applications Again To Uninstall a Standard Application28 EN Navigate in the Internet World ¡ Contract with the provider Contracting with the Internet Service Provider¡When you have contracted with a provider 30 EN Connection of Telephone Line and Modem Setup Seting up the modem 32 EN Internet Connection Setup Click Connect to the Internet option, and click Next Click Set up my connection manually option, and click NextClick Connect using a dial-up modem option, and click Next 34 EN Enter the phone number, and click Next Click Finish. The setup for connection wizard is complete 36 EN Internet Protocol TCP/IP Properties screen will appear Connecting to the Internet 38 ENClick Connect Disconnection from the Internet 40 EN Accessing a Web Click start and click E-mail on the Menu Setting up E-Mail Software 42 EN Enter the Account name and Password, and click Next Create 44 ENSending and Receiving E-mails Transmission Create a message To check the received messages, click Inbox on the screen 46 EN Hardware 48 EN Using the Pointing Device Double-click DragScroll buttons Using Hot keys Using the Numeric Keypad50 EN Increasing the Optional Memory Capacity Adding or Removing a Memory Board 52 EN Removing the memory board Mounting a memory board 54 EN Checking the Additional Memory BoardTotal amount of memory appears on the screen Using the SD Memory Card Slot Remove the dummy cardInsert an SD memory card Using an External Display Unit Connecting an external monitor56 EN Connecting to a network Setting for network connection¡Setting the IP address manually 58 EN ¡Setting a computer name or work group ¡Checking the MAC address 60 EN Click the Power Meter tab Checking the battery level 62 EN Power-saving mode System in halt status System in standby status Unknown partition on hard disk 64 EN PC Recovery Repeated PC Setup Setting Up Your PC Again Before starting Repeated PC Setup66 EN If you respond with C System Recovery ProcedureSelect the recovery method disk partitioning If you respond with a 68 EN Computer Wiederherstellung Recovery Troubleshooting If the Q&A does not help you PowerPower does not turn on 70 EN Startup and Operation of Windows Screen has hungTerminating an application forcibly 72 EN Troubleshooting PC is turned on but nothing appears on the screen ¡ When the Stand By lamp is flashing¡ When the Stand By lamp is not lit Display Cannot dial up Using the Internet¡ When a divider is used 74 EN PC dials but connection is not established ¡ The internal modem dials but negotiation is not made Check the following ¡ Check the user name and password76 EN PC cannot send or receive e-mail messages Battery Battery is not chargedBattery discharge faster than expected PC is hot Forgot the password78 EN Miscellaneous Setting procedure does not complete 80 EN Appendix List of Support Centres 82 EN Trademark notice 84 EN Specification MP-VGX1E Options separately available 86 EN Page 88 EN Page Victor Company of JAPAN, Limited