JVC MX-V588T Apply Echo to Your Voice, Adjusting the Music Key Control, English, Remote Control

Apply Echo to Your Voice

Echo can be applied to your voice through the microphone(s).

Remote Control		Steps			Explanation/Remarks
	On the Unit
	1.	Press the ECHO button.	1. Each time the ECHO button is pressed (on the Unit or
	2.	To Cancel, press the ECHO button		through the Remote Control operation), echo turns on
		again.		and off . The display will show as below:
	On the Remote Control				ECHO	OFF
	1.	Press the ECHO button while pressing
		the SHIFT button.
	2.	To cancel, press the ECHO button again	ECHO : Echo applies to your voice.
		while pressing the SHIFT button.
					The ( ) echo indicator lights up on the display.
			OFF : Cancels the echo.

Adjusting the Music Key Control

The key of the music can be adjusted.

Unit/Remote Control			Steps			Explanation/Remarks
		On the Unit
	1
		1.	Press the KEY CONTROL buttons ( I,i	1. When the KEY CONTROL is pressed each time, the
			) repeatedly.			key level (KEY -6to KEY +6) appears on the display.
		2.	To lower the key, press the KEY CON-
			TROL ( I) button repeatedly.
		3.	To raise the key, press the KEY CON-		Notes:
			TROL ( i) button repeatedly.		•	Once the music key is adjusted, the key level will
		4.	To Cancel the key adjustment, press the			not return to the previously level automatically af-
			KEY CONTROL buttons ( I,i ) until			ter playing a song.
			“ KEY 0” appears on the display.		• The music key cannot be changed while recording.
		On the Remote Control			• Once the source is changed, the key level returns to
						0.
	1	1.	While pressing the SHIFT key, proceed		•	The Sound Mode will be cancelled if the Karaoke
			with the following procedures.			function (multiplex Sound, Vocal Replace, Vocal
		2.	Press the KEY CONTROL buttons ( I,i			Masking) is selected.
			) repeatedly.
		3.	To lower the key, press the KEY CON-
	2
			TROL ( I) button repeatedly.
		4.	To raise the key, press the KEY CON-
			TROL ( i) button repeatedly.
		5.	To Cancel the key adjustment, press the
			KEY CONTROL buttons ( I,i ) until
			“ KEY 0” appears on the display.

English

39