JVC MX-V588T manual Tuning In a Station, Presetting Stations, English, Unit/Remote Control, Steps

Tuning In a Station

There are 3 ways to select a station : Manual Tuning, Auto Tuning, Preset.

Unit/Remote Control	Steps		Explanation/Remarks
Manual Tuning:
On the Unit
1.	Press the FM/AM button.	1.	The radio turns on.
2.	Press the TUNING DOWN or	2.	The frequency will shift from frequency to frequency
	TUNING UP button on the MULTI		until you find the one you want.
	CONTROL repeatedly.

Auto Tuning:
On the Unit
1.	Press the FM/AM station.	1.	The radio turns on.
2.	Press and hold the TUNING DOWN or	2.	When a station is tuned in, the frequency stops
	TUNING UP button on the MULTI		changing.
	CONTROL for a few seconds.
Preset:
On the Unit
1.	Press once and release the PREV 4 1.		This function is only possible after presetting stations
	P.DOWN or NEXT ¢ P.UP button		(refer to Presetting Stations below).
	on the MULTI CONTROL to go to the
	next preset station.
On the Remote Control
1.	Press the FM/AM station.	1.	After the preset number is selected and the number is
2.	Select the station by entering the preset		displayed, the broadcast frequency of the selected chan-
	number in the number keys of the		nel will appear on the display.
	Remote Control.

English

Presetting Stations

You can preset up to 30 FM stations and 15AM stations for the preset numbers.

Note : In some cases, test frequencies have been already memorized for the tuner since the factory examined the tuner preset function before shipment. This is not a malfunction. You can preset the stations you want into memory by following the presetting method.

Unit/Remote Control	Steps	Explanation/Remarks
	On the Unit
	1. Press the FM/AM button.
	2. Press the TUNING DOWN or	1. This will select the band (FM or AM).
	TUNING UP button on the MULTI	2. The frequency will shift from frequency to frequency
	CONTROL.	until you find the one you want.
	3. Press the number keys on the Remote	3. The preset number appears on the display after you have
	Control continuously.	pressed the number keys. If the key is pressed
	4. Repeat steps 1-3 for each station you	continuously, the preset number blinks. Release the
	want to store to a preset number.	button after the number starts to blink. This completes
	Notes :	the preset setting.
	Preset numbers 1 to 10:
	Press the number key for the required one.
	Preset numbers 11 to 20:
	Press 1 to 10 after pressing +10 button.
	Preset numbers 21 to 30:
	Press 1 to 10 after pressing +10 button twice.
		CAUTION: If the Unit is unplugged or if a power
		failure occurs, the preset stations will be erased in a
		few days. If this happens, preset the station again.

13