JVC MX-V588T manual Setting the SLEEP Timer, English, Remote Control, Steps, Explanation/Remarks

Setting the SLEEP Timer

The Sleep Timer is used to turn the Unit off after a certain number of minutes when it is playing. This function will let you fall asleep while listening to the music. Thus you will enjoy your sleep without having to worry about the Unit playing until the next morning.

The Sleep Timer can only be operated when the Unit is on and a source is playing.

	Remote Control		Steps		Explanation/Remarks
		On the Remote Control
1				1.	The SLEEP indicator will light up on the display.
		1.	Press the SLEEP button on the Remote
			Control.
		2.	Press the SLEEP button repeatedly to
			select the length of time.		A.BASS EX S.MODE
					SLEEP
		3.	To Change the SLEEP Timer setting,	2.	Each time you press the SLEEP button, the number of
			press the SLEEP button until the num-
			ber of minutes you want appears.		minutes change in the sequence as shown below.
		4.	To Cancel the SLEEP Timer setting,		= 10 = 20 = 30 = 60 = 90 = 120 = Canceled
			press the SLEEP button until the		(back to the beginning)
			SLEEP indicator goes off. Turning off	•	When the number of minutes you want appears on the
			the Unit also cancels the SLEEP timer.		display, wait for 5 seconds until the number of minutes
					stops blinking and is lighted steadily.
				•	The Unit is now set to turn off after the number of min-
					utes you set.

English

35