About This User Guide
Note: Before attempting to connect, operate or adjust this product, please read and save this User Guide completely.
Thank you for buying the Portable DVD Player. Instructions in this User Guide describe mainly the use of the remote control. Buttons with the same or similar marking on your Portable DVD Player itself, have the same functions as those of the remote control. For introduction to the display (Portable DVD Player), buttons (Remote Control), and various connections, please refer to the Quick Guide.
The section below covers significant information about the unit’s general behavior. Please read carefully. If you wish, you can use the same functions on the remote control.
rTo turn on the DVD player, press 
Power on the top panel of the player.
rTo switch the player to 
Power. To resume to Play mode, press 
Power again.
rWhen turning on the DVD Player, the unit directly enters DVD mode.
rIf a disc is already placed on the disc tray, the recorder will start to load the disc right after power is turned on.
rTo switch to other modes, do the following:
1. If there is no disc placed in the recorder, press 
Mode to toggle through different modes.
2. If there is a disc placed in the recorder, press 
Stop twice to completely stop DVD playback. Press 
Mode to toggle through different modes.
rWhen pressing 
Stop once during DVD playback, the player turns to a 
Play.
rPress 
Stop twice to completely stop playback.
rIf an “INVALID KEY” appears on the left top corner of the screen, it indicates that the action is prohibited or not available.
PORTABLE DVD PLAYER USER GUIDE | 5 |
