Operating modes, Turning on the Appliance

Operating modes

Illustration 0/OFF =Off

1Operating with cold water

2Operating with hot water

Turning on the Appliance

Set appliance switch to desired operat- ing mode.

The device starts briefly and turns off, as soon as the working pressure is reached.

Release the trigger gun.

When activating the hand spray gun the de- vice switches back on.

Note: If no water comes out of the high pressure nozzle, vent pump.

Vent pump:

With open hand spray gun turn device on and off multiple times with the device switch.

Note: By dismantling the spray lance from the hand spray gun, the venting process is accelerated.

Interrupting operation

Release the lever of the hand-spray gun; the device will switch off.

Release again the lever of the hand- spray gun; the device will switch on again.

Select spray type

Close the hand spray gun.

Use the safety catch to secure the handgun lever.

Turn the casing of the nozzle till the de- sired symbol matches the marking.

High pressure circular spray (0°) for specially stubborn dirt

Flat low pressure spray

(CHEM) for operating using detergents or cleaning at low pressure.

High pressure flat spray (25°) for large dirt areas

Operation with detergent

–For considerate treatment of the envi- ronment use detergent economically.

–The detergent must be suitable for the surface to be cleaned.

Illustration

Take out detergent suck hose.

Turn filter on the detergent suction hose in order to dispense the detergent.

Suspend end of suction hose in a con- tainer filled with detergent.

Set nozzle to "CHEM".

Cleaning

Set the detergent concentration accord- ing to the surface to be cleaned.

Note: To prevent damage due to too much pressure, always position high pressure ray first from a greater distance towards object to be cleaned.

Recommended cleaning method

–Loosen the dirt:

Spray detergent economically and let it work for 1...5 minutes but do not let it dry up.

–Remove the dirt:

Spray off loosened dirt with the high- pressure jet.

Operating with cold water

Removal of light contaminations and clear rinse, i.e.: Gardening tools, terrace, tools, etc.

Set the appliance switch to "1".

Operating with hot water

Danger

Scalding danger!

Set the appliance switch to "2".

After operation with detergent

Completely close the filter at the deter- gent suction hose (-).