SECTION 5

SERVICE TECH INFORMATION

5A.TROUBLESHOOTING

should get a reading in the display. If you get a reading, unhook the in and out plumbing and check the turbine for binding.

SENSOR

HOUSING

TURBINE

TURBINE

SUPPORT &

SHAFT

VALVE POSITION INDICATORS: Depending on the valve position, the following indicators show in the display:

INDICATOR

VALVE POSITION

Serv

. . service

Fill

. . fill

Brine

. . brining/brine rinse

Bkwash . . . .

. . backwash

Rinse

. . fast rinse

When the valve is rotating from 1 cycle to another, both indicators flash. For example, if the valve is in transition between fill and brining, both Fill and Brine flash. Upon reaching brining position, Fill goes off and Brine is on steady. The time display shows the minutes of the cycle remaining.

NOTE: If the faceplate is left in a diagnostic display (or a flashing display when setting times or hardness), present time automatically returns if a button is not pressed within 4 minutes. To return to the diagnositc display, repeat step 2.

OTHER INFORMATION: While in this diagnostic screen, the following information is available and may be beneficial for various reasons. This information is retained by the computer from the first time electrical power is applied to the faceplate.

¼ Press

 

 

 

to display the number of days this face

plate has

 

had electrical power applied.

¼ Press

 

 

 

 

to display the number of regenerations

 

 

 

 

 

 

 

 

 

initiated by this faceplate since the HF code number was entered.

3.Press the #1 SELECT button and hold 3 seconds until¼

SALTSIGNAL

LEVELLEVEL

8

. . . HF32 shows. 7

6

5

4

3

2

1

This code identifies the softener nominal capacity size. If the wrong number shows, the softener will operate on incorrect programming. Do the following as needed.

HF32 does show — Press the #1 SELECT button to return the present time display.

To change HF number - Press the

 

 

 

 

 

or

 

 

 

 

button

 

 

 

 

 

until HF32 shows. Then, press the #1 SELECT button and reset the timer¼ page 6.

TIMER (PWA) REPLACEMENT: Be sure the valve is in service position (observe valve cycle indicator) when replacing the timer (PWA).

If, after installing and programming the re- placement timer (PWA), the valve is not in ser- vice position, do the following to assure correct cycle orientation, or timing, between the face- plate and valve.

Use the MANUAL ADVANCE procedures, page 24. With the RECHARGE NOW button, advance through the recharge cycles until the valve stops in service position, and RE- CHARGE no longer flashes in the display.

NOTE: The valve motor may automatically drive through several valve positions while searching for service. If an error code occurs, unplug the transformer, then plug in again.

MOTOR

position markers (valve in service)

CAM

23

Page 22 Page 24
Page 23
Image 23
Kenmore 625.348670 owner manual HF32 shows
Page 22 Page 24

625.348670 specifications

The Kenmore 625.348670 is a portable dehumidifier designed to improve indoor air quality and provide a comfortable living environment. It is particularly effective in combating excess moisture in homes, especially in areas prone to high humidity such as basements, bathrooms, and laundry rooms.

One of the main features of the Kenmore 625.348670 is its capacity to remove up to 50 pints of moisture from the air per day. This high extraction rate is suitable for rooms up to 4,500 square feet, making it ideal for both residential and commercial applications. The unit is equipped with a built-in humidistat that allows users to set their desired humidity level, automatically turning the dehumidifier on and off as needed to maintain optimal conditions.

The dehumidifier features a user-friendly control panel, complete with an LED display that shows the current humidity level and settings. It also has several operational modes, including continuous operation, allowing for the option of continuous drainage via a drain hose—ideal for areas with persistently high humidity levels. The 625.348670 is designed with convenience in mind, featuring an easy-to-remove water tank for manual drainage when continuous drainage is not an option.

The Kenmore 625.348670 employs advanced technologies for efficient moisture extraction. Its compressor system operates quietly, ensuring minimal disruption in your living space. This unit also emphasizes energy efficiency, working to reduce energy consumption while still effectively controlling humidity levels, which can be a significant advantage in lowering energy bills.

Another characteristic to note is its portability. The unit is designed with built-in handles and caster wheels, allowing easy movement from room to room. Additionally, its compact design ensures it can fit into tighter spaces without sacrificing performance.

Overall, the Kenmore 625.348670 is an excellent solution for anyone looking to control humidity levels in their environment. With its robust design, high moisture removal capacity, user-friendly features, and energy efficiency, it stands as a reliable choice for managing indoor air quality effectively.
Top Page Image Contents