SECTION 3

CARE OF YOUR SOFTENER

3A. SALT¼ REFILLING STORAGE TANK/BREAKING A SALT BRIDGE

WHEN TO REFILL WITH SALT (or potassium chloride): The Salt Monitor System (see page 10) will turn the low salt light on to warn you when to refill with salt. Check for a low salt light a few weeks after you install the softener, and every week after that. Always refill at about the #2 salt monitor level. At this level, the tank is about 1/3 full. Never let the softener use all the salt before refilling. Without salt, you will soon have hard water. After filling, reset the Salt Monitor System, page 10.

NOTE:

You will have a loss in softening capacity and may get partly hard water if less than 10 inches (salt monitor level 2) of salt is in the storage tank.

PLEASE SEE PAGE 9 FOR SALT FILLING DIRECTIONS.

BE SURE TO RESET THE SALT MONITOR, PAGE 10.

SALT BRIDGE

Sometimes, a hard crust or salt bridge forms in the salt storage tank. It is usually caused by high humidity or the wrong kind of salt. When the salt bridges, an empty space forms between the water and salt. Then salt will not dissolve (melt) in the water to make brine. Without brine, the resin bed does not regenerate and you will have hard water.

If the storage tank is full of salt, it is hard to tell if you have a salt bridge. Salt is loose on top, but the bridge is under it. The following is the best way to check for a salt bridge.

Salt should be loose all the way to the bottom of the tank. Hold a broom handle, or like tool, up to the softener as shown in FIG. 9. Make a pencil mark on the handle, 1² or 2² below the top height of the rim. Then, carefully push it straight down into the salt. If a hard object is felt before the pencil mark gets to the top of the tank, it’s most likely a salt bridge. Carefully push into the bridge in a few places to breakit. Donot try to break the salt bridge by pounding on the outside of the salt tank. You may damage it.

If the wrong kind of salt made the bridge, take it out. Then fill the tank with nugget or pellet salt only.

FIG. 9 SALT BRIDGE

push tool into salt bridge to break

1”-- 2”

pencil mark

broom handle

salt

salt bridge

water level

16

Page 16
Image 16
Kenmore 625.348670 owner manual Please see page 9 for Salt Filling Directions, Salt Bridge

625.348670 specifications

The Kenmore 625.348670 is a portable dehumidifier designed to improve indoor air quality and provide a comfortable living environment. It is particularly effective in combating excess moisture in homes, especially in areas prone to high humidity such as basements, bathrooms, and laundry rooms.

One of the main features of the Kenmore 625.348670 is its capacity to remove up to 50 pints of moisture from the air per day. This high extraction rate is suitable for rooms up to 4,500 square feet, making it ideal for both residential and commercial applications. The unit is equipped with a built-in humidistat that allows users to set their desired humidity level, automatically turning the dehumidifier on and off as needed to maintain optimal conditions.

The dehumidifier features a user-friendly control panel, complete with an LED display that shows the current humidity level and settings. It also has several operational modes, including continuous operation, allowing for the option of continuous drainage via a drain hose—ideal for areas with persistently high humidity levels. The 625.348670 is designed with convenience in mind, featuring an easy-to-remove water tank for manual drainage when continuous drainage is not an option.

The Kenmore 625.348670 employs advanced technologies for efficient moisture extraction. Its compressor system operates quietly, ensuring minimal disruption in your living space. This unit also emphasizes energy efficiency, working to reduce energy consumption while still effectively controlling humidity levels, which can be a significant advantage in lowering energy bills.

Another characteristic to note is its portability. The unit is designed with built-in handles and caster wheels, allowing easy movement from room to room. Additionally, its compact design ensures it can fit into tighter spaces without sacrificing performance.

Overall, the Kenmore 625.348670 is an excellent solution for anyone looking to control humidity levels in their environment. With its robust design, high moisture removal capacity, user-friendly features, and energy efficiency, it stands as a reliable choice for managing indoor air quality effectively.