Kenwood DNX6040EX Initial setup, 1Set each item as follows, Angle, Color, (P.97), EXT SW, Camera, Language, Basic Operations, EXT SW setup (P.73), Camera Setup (P.78)

Return to the Top page

Basic Operations

Initial setup

Perform this setup when you use this unit first time or when you reset the unit (P.97).

1Set each item as follows.

Language

Select the language used for the control screen and setting items. Default is “American English (en)”.

1Touch [SET].

2Touch [2] or [3] to select the desired language.

3Touch [Enter].

For detailed operation, see Language setup (P.72).

Angle

Adjust the position of the monitor. Default is “0”. 1Touch [SET].

2Touch desired angle number and [ ].

For detailed operation, see Monitor angle control (P.74).

iPod AV Interface Use

Set the terminal which your iPod is connected to. Default is “iPod”.

1Touch [iPod] or [AV-IN2].

Color

Set the screen and button illumination color. You can select whether to allow color scan operation or select a fixed color for operation.

1Touch [SET].

2Touch [ON] or [OFF] of [Panel Color Scan].

3If you want to change color, touch [SET] of [Panel Color Coordinate].

4Touch your desired color and [ ].

For detailed operation, see Panel color coordinate (P.75).

EXT SW

Control the external devices.

1Touch [SET].

2Set device name, output pattern, and pulse set for each device. Then, touch [ ]. For detailed operation, see EXT SW setup (P.73).

Camera

Set the parameters for the camera. 1Touch [SET].

2Set each item and touch [ ].

For detailed operation, see Camera Setup (P.78). Continued

11