Kenwood DNX6040EX Equalizer Control, NOTE, Loudness, operation, Bass Boost, Volume Offset, Subwoofer Level, Fader #/Balance #, 1 Touch [Equalizer], Controlling EQ curves

2 Set each item as follows.Fader #/Balance #

Adjust the volume balance around the touched area.

[2] and [3] adjust the right and left volume balance.

[5] and [∞] adjust the front and rear volume balance.

Volume Offset*

Finely adjust the volume of the current source to minimize the difference in volume between different sources.

Subwoofer Level

Adjusts the subwoofer volume. This setting is not available when subwoofer is set to “None”. See Speaker setup (P.81).

Bass Boost

Sets the amount of bass boost among “OFF”/ “Step1”/ “Step2”.

Loudness

Turns the loudness control function on or off. If turned on, high and low tones are automatically enhanced during low volume. Settable only when zone function (P.87) is set to off.

*If you have increased the volume first, then reduced the volume using the “Volume Offset”, the sound generated if you suddenly switch to another source may be extremely loud.

Return to the Top page

Audio Setting Up

Equalizer Control

You can adjust equalizer by selecting the optimized setting for each category.

If you use, you can also adjust equalizer manually.1 Touch [Equalizer].

Equalizer screen appears.

operationControlling EQ curves

1 Select EQ curve from [Natural], [Rock], [Pops], [Easy], [Top40], [Jazz], [Game], [iPod], and [User].

NOTE

• [iPod] is available only during iPod source.

85