Kenwood DNX6040EX Flat, EQ INIT, SW Level, Equalizer as desired, Controlling EQ curves, Controlling SystemQ-Ex, Controlling equalizer manually, Bass EXT (Bass Extend Settings)

Return to the Top page

Audio Setting Up

Controlling equalizer manually

This setting cannot be performed when you select [iPod] in the Equalizer screen.

1	Touch [EQ] in the Equalizer screen.
2	Touch the screen and set the Graphic
	Equalizer as desired.

Gain level (light green boxed area)

Adjust the gain level by touching the each frequency bar.

Touching [2], [3], [5] and [∞] can also adjust the level. Use [2] and [3] to select a frequency, and [5] and [∞] to set the level.

EQ INIT

Returns to the previous level which the gain level is adjusted.

Flat

Tone curve becomes flat.

Bass EXT (Bass Extend Settings)

When turned on, the frequency lower than

62.5Hz is set to the same gain level as 62.5 Hz.

SW Level

Adjusts the subwoofer volume. This setting is not available when subwoofer is set to “None”. See Speaker setup (P.81).

operation

Controlling EQ curves

1 Select EQ curve from [Natural], [Rock], [Pops], [Easy], [Top40], [Jazz], and [User] using [2] and [3].

Controlling SystemQ-Ex

Selects items to be adjusted for tone curve setup. If you turn off this setting, only Level can be set up for tone curves.

1 Touch [ON] or [OFF] of [SystemQ-Ex].

86