Kenwood DNX6040EX Space Enhancer, Listening Position, NOTE, NOTE, NOTE, 1 Touch [Position], 1 Touch [Space Enhancer], 2 Touch [Small], [Large], or [OFF]

Return to the Top page

Audio Setting Up

NOTE

•When the rear speaker sound is switched, the audio source that is output at the AV OUTPUT terminal is also switched to the same source.

•When the dual zone function is set to on, the following functions are not available.

•Output from the subwoofer

•Subwoofer Level/Bass Boost(P.85)

•Equalizer Control/Space Enhancer/

Listening Position(P.85, 88, 88)

•DSP Bypass Control/Speaker Setup/Car

Type (DTA) Setup(P.84, 81, 83)

Space Enhancer

1 Touch [Space Enhancer].

Space Enhancer screen appears.

2 Touch [Small], [Large], or [OFF].

Each setting value indicates the soundscape level.

NOTE

• This setting is not available during tuner source.

Listening Position

You can adjust the sound effects according to your listening position.1 Touch [Position].

Position screen appears.

2 Select listening position from [Front R] (Right front), [Front L] (Left front), [Front All] (All front), [All], and [User] using [2] and [3].

NOTE

•You can store present setting in memory by touching [P1], [P2], or [P3] for 2 seconds. You can also recall the setting by touching corresponding number.

•The final distance is adjusted to the total of car type set up value (P.83) and position setup (both position and position DTA) value.

•If you change the car type set up value (P.83), the position is set to [All].

•Only the adjusted distance of position setup (position and position DTA values) is stored in memory. Therefore, the final adjustment distance changes if you change the car type set up value (P.83).

88