Kenwood DNX6040EX Software Information, AV Input Setup, NOTE, Touch [SETUP], Touch [SETUP], Touch [Source], Touch [Software], iPod AV Interface Use*1, Set each item as follows

Software Information

Check the software version of this unit.

1	Touch [Menu] on any screen.
2	Touch [SETUP].
	SETUP Menu screen appears.
3	Touch [Software].

Return to the Top page

Setting Up

AV Input Setup

You can set AV input parameters.

1	Touch [Menu] on any screen.
2	Touch [SETUP].
	SETUP Menu screen appears.
3	Touch [Source].

Software Information screen appears.

4 Confirm the software version. Touch [Update] as necessary.

4

5

Touch [AV-IN SETUP] in the list.

AV-IN SETUP screen appears.

Set each item as follows.

NOTE

•For how to update the software, see the relevant update procedure manual which comes with the software.

iPod AV Interface Use*1

Sets the terminal which iPod is connected. Setting values are iPod and AV-IN2. Default is “iPod”.

AV-IN1 Name/AV-IN2 Name*2

Sets a name to be displayed when you select a system that is connected via the AV INPUT port. Default is “VIDEO”.

*1 This item can be set when in STANDBY source and also the iPod is disconnected.

*2 [AV-IN2 Name] becomes settable when “AV-IN2” is selected in [iPod AV Interface Use].

79