Kenwood DNX6040EX Controlling General Audio, NOTE, NOTE, Bypass, Through, DSP select, or slider bar, Car type adjust, 1 Touch [Audio Control]

Return to the Top page

Audio Setting Up

Car type adjustYou can manually set the sound output timing of each channel.

1	In the Car Type screen, touch [Adjust].
	Car Type Adjust screen appears.
2	Touch the speaker you wish to adjust
	and set a delay time using [2] and [3]
	or slider bar.

NOTE

•Make fine adjustment of the delay time of the speaker output specified here to have a more suitable environment for your vehicle.

•The settings of the delay time are automatically identified and compensated by specifying the distances of each speaker from the center of the vehicle interior.

1 Set the front and rear positions and the height of the reference point to the position of the ears of the person sitting in the front seat, and set the right and left positions to the center of the vehicle interior.

2Measure the distances from the reference point to the speakers.

3Calculate the distance difference in accordance with the farthest speaker.

+3.4feet

1.6feet

2.5feet

5feet +2.5feet

+0feet

DSP selectYou can select whether using DSP (Digital Signal Processor) System.1 Touch [Bypass] or [Through] of [DSP Select] in the Audio SETUP screen.Bypass

There is no effect by DSP.

Through

There is an effect by DSP.

NOTE

•When the mode is set to [Bypass], DSP System cannot be adjusted.

Controlling General Audio

1 Touch [Audio Control].

84