Kenwood DNX6040EX Hands-FreeControl, Bluetooth output setup, Registering Bluetooth unit PIN code

Registering Bluetooth unit PIN code

You can set the PIN code to the Bluetooth unit. The code is acquired when registering (pairing) from the cell-phone or audio player side.

1	Touch [SET] of [Receiver PIN Code] in
	the Bluetooth SETUP screen.
	Receiver PIN Code Set screen appears.
2	Enter a code number and touch
	[Enter].

NOTE

•If you want to cancel the registration, touch [Cancel].

•If you want to clear the entered number, touch [Clear].

Bluetooth output setup

You can select speakers to output the sound from cell-phone (such as phone call voice and ringing tone) and Bluetooth audio player.

1 Touch [Front Only] or [All] of [Bluetooth HF/Audio] in the Bluetooth SETUP screen.

Front Only

Outputs from the front speakers.

All

Outputs from all speakers.

Return to the Top page

Bluetooth Operation

Hands-Free Control

You can perform various setup about hands- free function.

1	Press the <TEL> button.
	Hands Free screen appears.
2	Touch desired key in the Hands Free
	screen.

See the following section for each setting.

•Set up the Hands-Free system (P.64)

•Set up SMS (P.65)

•Preset the phone number (P.67)

•Register your voice (P.68)

•Register key word voice (P.69)

63