Kenwood DNX6040EX Yes, NOTE, screen, Pulse Set, Menu screen, EXT SW setup, Setup memory, Output Pattern, [Lock]/[Unlock], SW1 Name/SW2 Name, Set each item as follows

EXT SW setupSet up the external switch power mode.

1	Touch [EXT SW] in the System Menu
	screen.
	EXT SW screen appears.
2	Set each item as follows.

SW1 Name/SW2 Name

Sets the name of the external device.

Output Pattern

Sets the power signal output mode among “Pulse”/“Level”. Default for EXT SW1 is “Pulse” and for EXT SW2 is “Level”.

You can set to turn output on/off each time the button on the EXT SW screen is touched. See External Device Control (P.80).

Pulse Set

Sets the pulse signal output time. Outputs 500ms when “1” is set.

Increases by 200ms with each step. Up to 100 steps can be set.

NOTE

•You can enter characters only after you have applied the parking brake.

•“Pulse”: Generates a single power signal pulse.

•“Level”: Continues output of high power signal.

Return to the Top page

Setting Up

Setup memory

Audio Control, AV-IN SETUP, Navigation, Camera, and Audio SETUP settings can be memorized. The memorized settings can be recalled at any time. For example, even when the settings are cleared due to replacement of the battery, the settings can be restored.

1	Touch [SETUP Memory] in the System
	Menu screen.
	SETUP Memory screen appears.
2	Follow the instruction on the screen.

[Lock]/[Unlock]*

Locks or unlocks the AV-IN SETUP, Navigation, and Audio SETUP settings.

Yes

Memorizes or recalls the settings.

No

Cancels the function or memorization. The SETUP Menu screen appears again.

*When [Lock] is selected, you cannot change the AV-IN SETUP, Navigation, and Audio SETUP settings.

Also, the locked key mark is displayed under each setting icon in the setup menu.

Continued

73