Return to the Top page

Bluetooth Operation

Muting Audio Volume upon Reception of Phone Call (DNX5180 only)

When a call is received or you answer a call, the Call Interrupt screen appears and system is paused.

The system resumes playing automatically when the call ends and hang up the phone.

NOTE

•To use the Mute feature, you need to hook up the mute wire to your telephone using a commercial telephone accessory. See “Connection” (P.27) in Quick Start Guide.

Call waiting

If you receive a call during another call, you can answer it with the current call suspended or switch between the current call and waiting call.

Answer the new incoming call

Touch [ ]. The current call is kept suspended.

Switch between the current and waiting call

Touch [ ] again.

Each time you touch [

], the calling party is

switched.

 

Terminate the current call

Touch [ ].

The call switches to the waiting one.

Bluetooth Setup

You can register PIN code, select the device to connect, and perform output setup.

1 Press the <TEL> button.

Hands Free screen appears.

2 Touch [BT SETUP].

Bluetooth SETUP screen appears.

See the following section for each setting.

•Register the PIN code (P.63)•Select the unit to connect (P.57)•Set up output (P.63)

62