Kenwood DNX6040EX Troubleshooting, Problems And Solutions, Reason, Reason, Problem, Problem, Solution, Solution, About settings, Troubleshooting, Disc setup (P.27)

Return to the Top page

Troubleshooting

Troubleshooting

Problems And Solutions

If any trouble occurs, first check the following table for possible problems.

•Some functions of this unit may be disabled by some settings made on this unit.

•What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring.

About settings

		Problem	Reason	Solution
• Cannot set up the subwoofer.			Subwoofer is not set	Set the subwoofer to on.
• Cannot set up subwoofer phase.			to on.	See Speaker setup (P.81).
• No output from the subwoofer.
			The dual zone function	Set the dual zone function to off.
• Cannot set up the low pass filter.
			is enabled.	See Zone Control (P.87).
• Cannot set up the high pass filter.
• Cannot select the output			The dual zone function	Set the dual zone function to on.
	destination of the subsource in		is disabled.	See Zone Control (P.87).
	the dual zone.
• Cannot adjust the volume of the
	rear speakers.
• Cannot set up the equalizer.			The dual zone function	Set the dual zone function to off.
• Cannot set up the crossover			is enabled.	See Zone Control (P.87).
	network.
			“DSP Select” is set to	Set “DSP Select” to “Through”.
			“Bypass”.	See DSP select (P.84).
		About audio operations
		Problem	Reason	Solution
Radio reception is poor.			The car antenna is not	Pull out the antenna all the way.
			extended.
			The antenna control	Connect the wire correctly.
			wire is not connected.	See “Connection” in the Quick Start Guide.
Cannot play audio files stored in			“CD Read” is set to “2”.	Set “CD Read” to “1”.
a disc.				See Disc setup (P.27).
Cannot select a folder.			The random play	Turn off the random function.
			function is enabled.
Cannot perform repeat play			The PBC function is	Turn off the PBC function.
during VCD playback.			enabled.
The specified disc does not play,			The disc is quite dirty.	Clean the disc.
but another one plays instead.				See Precautions on handling discs (P.4).
			The disc is severely	Try another disc instead.
			scratched.
The sound skips when an audio			The disc is scratched	Clean the disc.
file is being played.			or dirty.	See Precautions on handling discs (P.4).
			The recording	Record the file again or use another disc.
			condition is bad.

94