High-speed recording of all CD tracks onto an MD

All of the tracks in a CD can be recorded in half the usual period of time.

VOLUME/

 

 

 

MULTI CONTROL

 

SET/DEMO

 

 

MENU

 

 

 

REPEAT

MD REC BEST HITS

u

 

 

 

High Speed D bbing Syste

m

 

 

/MD

・

 

 

 

MENU

SET/DEMO SOUND

 

 

 

VOLUME/MULTI CONTROL

 

 

 

STOP/

 

 

TUNER

CDMDPOWER

 

 

PUSH OPEN

 

STOP

Main unit only

1Makepreparationforrecording.

See steps 1 to 3 in "Recording CD onto MD" (page 18).

2Press the MENU key.

3PresstheVOLUME/MULTICON- TROL UP () or DOWN ( ) key so that "REC MODE ?" is dis- played, then press the SET/ DEMO key.

4PresstheVOLUME/MULTICON-

TROL UP () or DOWN ( ) key so that "CD → MD <HIGH>" is displayed,thenpresstheSET/

DEMO key.

The CD starts to be played at the double speed and the signal is recorded onto the MD also at the double speed.

When all CD tracks have been recording, both the CD and MD stop automatically.

Perform the operations in steps 2 to 4 within 5 seconds.

To stop recording in the middle :

Press the STOP 7key (or the 7STOP key on the remote). This stops both playback and recording.

÷Be careful not to apply vibration to the unit while "WRITING" is displayed, because the MD recorder is writing recorded and edited data in the MD in this period. Also, to avoid loss of recorded and edited data, do not unplug the power cord before "WRITING" disappears.

÷ Once high-speed recording of "CD → MD <HIGH>" has been started, it is not permitted to record the same CD by high-speed recording within 74 minutes after the start of previous high-speed record- ing. It is also prohibited to continue high-speed recording of more than 31 discs within 74 min- utes.

If you want to record the same CD again, use the MD O.T.E. recording (page 18).

Time until the high-speed recording of the same CD is permitted

section Application

Recording

29 EN