Connections

Confirm that the following accessories are present

AM loop antenna (x 1)

AM loop antenna

Remote control unit (x 1)

R6/SUM-3 batteries

 

stand (x 1)

 

for remote (x 2)

 

 

RC-

 

 

 

MDX0001

 

Unpacking

Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost.

Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately. If your unit was shipped to you directly, notify the shipping company without delay. Only the consignee (the person or company receiving the unit) can file a claim against the carrier for shipping damage.

We recommend that you retain the original carton and packing materials for use should you transport or ship the unit in the future.

Keep this manual handy for future reference.

Loading batteries in the remote control unit

(1)Remove the battery com- partment cover of the re- mote.

(2)Insert two R6/SUM-3/"AA"- size batteries following the po- larity indications.

(3)Attach the battery com- partment cover.

÷The provided batteries are intended for use in operation checking, and their service life may be short.

÷When the remote-controllable distance becomes short, replace both of the batteries with new ones.

÷If direct sunlight or the light of a high-frequency fluorescent lamp (inverter type, etc.) is incident to the remote sensor on the main unit front panel, malfunction may occur. In such a case, change the installation position to avoid malfunction.

÷When pressing more than one remote control keys successively, press each key securely by leaving an interval of 1 second or more between keys.

÷The standard remote-control range is within about 6 meters from the main unit front panel. Be sure to point the remote to remote sensor on the front panel.

6 EN