Connections (continued)
Mode display
The area on the right of the display panel shows the input selection (source) and current operation mode.
1Source display / CD, MD and TUNER
2Recording indicator
3Selected input source display
4Recording direction display
The points blink when recording pauses.
5Volume indicator and Play / Pause mode indicator Two points blink to indicate the Pause mode.
In regard to demonstration
This unit incorporates a demonstration mode (display only). The demonstration shows the display conditions of various operation modes by switching them sequentially, but the audio does not vary during it.
When the power supply fails and restores or the power cord is unplugged and plugged during operation, the unit automatically enters the demonstration mode ("DEMO ON").
To cancel demonstration mode : Press the SET/DEMO key while "DEMO ON" is indicated.
To enter demonstration mode : Keep on pressing the SET/DEMO key for more than 2 seconds
while the unit is ON.