To cancel program timer :

Press the TIMER key on the remote so that "PROG.1" and "PROG.2" are not lit.

To check or change the timer setting :

Restart the procedure from step 1 again.

÷Be sure to adjust the time of the day (page 10) before using the timer functions.

÷PROG.1 and PROG.2 should be set so that their operating periods do not overlap. Leave at least 1 minute of interval between the two programs.

÷The speakers do not output audio during timer recording.

÷The program timer setting is held in memory even after it is canceled. The program timer setting remains in memory unless it is newly set again.

÷If the STANDBY/TIMER indicator is blinking in green, the timer setting may be erroneous or the time of the day is not adjusted. Re-set the appli- cable item.

50 EN