Kenwood TS-480SAT, TS-480HX instruction manual Remote Control Panel Rear, Microphone, UP/ DWN keys

3 GETTING ACQUAINTED

REMOTE CONTROL PANEL (REAR)

q

qSpeaker

When the headphones are connected, the speaker mutes.

MICROPHONE

If you wish to use a commercially available 3rd party angle or mount, there are 4 screw holes available on the rear of the Remote Control panel so that you can mount it to the angle or mount. Use 3 mm x 8 mm tapping screws to mount the panel securely to the angle or mount. (The tapping screws are not supplied).

DWN UP

qw

PTT

qPTT (Push-to-Talk) switch

The transceiver is placed in Transmission mode when this non-locking switch is held down. Releasing the switch returns the transceiver to Reception mode.

wUP/ DWN keys

Use these keys to step the VFO frequency, Memory Channels, or Menu selections up and down.

Press and hold these keys to continuously change the settings.

17