KitchenAid W10236413B manual To Assemble Pasta Press Accessory, English, Flange

Models: W10236413B

1 25
Download 25 pages 22.55 Kb
Page 6
Image 6
TURN AFTER

To Assemble Pasta Press Accessory

ENGLISH

3.Place the pasta ring (D) over the plate and gently turn by hand until finger tight but not over tightened.

A multipurpose combo tool (L) with a hook and wrench is provided. The flat end may be used to help push dough into the press. The wrench may be used to loosen the pasta ring from the press body. The hook may be used to pry the auger out of the casing.

RIGATONI

4. Insert the cutter (B) into the socket, aligning the flange with the left side of the slot as shown. Push in until locked into place and turn cutter to the right. The pasta press is now ready to attach to the stand mixer.

TURN AFTER

INSERTING

INTO SOCKET

A storage case (E) is provided to store pasta plates (F, G, H, I, J and K).

NOTE: Do not use combo tool to tighten pasta ring.

RIGATONI

FLANGE

4

Page 6
Image 6
KitchenAid W10236413B manual To Assemble Pasta Press Accessory, English, Turn After Inserting Into Socket, Flange