To Attach Pasta Press Accessory
ENGLISH
Before Attaching Pasta Press Accessory
Remove “Do not immerse in water” label, and detach the storage case from the accessory housing top.
To Attach:
1.Turn stand mixer speed control to OFF.
2.Unplug the stand mixer.
3.Loosen the accessory knob (P) by turning it counterclockwise.
4.Remove the accessory hub cover or flip up hub cover.
5.Insert the accessory shaft housing (N) into the accessory hub (O) making certain that accessory power shaft fits into square hub socket.
6.It may be necessary to rotate the accessory back and forth. When the accessory is in proper position, the pin on the accessory housing will fit into the notch on the hub rim.
7.Tighten the accessory knob by turning it clockwise until the accessory is completely secured to stand mixer.
N O P
To Use Pasta Press Accessory
WARNING
Rotating Blade Hazard
Always use food pusher.
Keep fingers out of openings.
Keep away from children.
Failure to do so can result in amputations or cuts.
1.Set the stand mixer speed between 6 and 10, according to pasta type and personal preference. For best results, Fusilli should be extruded at a maximum speed of 6. Slower speeds are also recommended for very short pasta. Longer pasta, such as Spaghetti may be extruded at higher speeds.
2.Slowly feed
3.Use combo tool to push dough only if dough becomes caught in hopper and no longer self feeds.
6
