14
OPERATION
2. Insert a new battery into the battery holder. Make sure that the positive side
(marked on the battery as “+”) is facing upwards.
3. Reinstall the battery holder into the remote control to complete the battery
installation.
Using the remote control
You can use the enclosed wireless remote control to control this device. When
using the remote control, please aim at the device's remote control sensor,
located on the front of the device. A30 degree angle is recommended for best
operation.
Note:
• Objects between the remote control and the sensor window may prevent
proper operation.
• Similar remote controls could interfere with the function of the player.
• Make sure not to store the remote control upside down or with any objects
pressing on the buttons - this could drain the batteries.
Cautions regarding use of remote control
• Please do not expose the remote control to shock and liquids and do not place
it in areas with high humidity. Do not install or place the remote control under
direct sunlight, as the heat may cause deformation of the unit.
• When the remote sensor window is exposed to direct sunlight, it may not work
properly. If so, please operate the remote control closer to the remote sensor
window or change the angle of the lighting or device.
Important notes about the battery
• If the unit is not used for a longer period of time, we recommend you to
remove the battery.
• Please do not use batteries other than specified. Improper use of batteries
can result in a leakage of chemicals and/or explosion.
• In case of any leakage of batteries, dispose of the batteries right away and
avoid touching the chemical discharge. Make sure to clean the remote con-
trol’s battery compartment before installing a new battery.
Remote control
bottom
30° 30°
DVD4620
*Picture of model DVD4620