Kodak A-61003 manual FC-8

	Function Code Name/
Code	Description	Additional Input
F31	Lead End Code	• Enter the roll number, if different than the one
	Allows you to create a lead	displayed.
	end code for retrieval	• Press the Enter key.
	purposes.	• Enter the operator ID, if different than the one
		displayed.
		• Press the Enter key.
		• Enter the next Image Address, if different than
		the one displayed.
		• Press the Enter key.
F32	Trail End Code	none
	Allows you to create a trail
	end code for retrieval
	purposes.
F33	Roll Number	To enter a new roll number:
	Allows you to display the	• Enter a new roll number, up to nine (9) digits.
	current roll number and/or	• Press the Enter key.
	change to a new roll number.
F34	Operator ID Number	To enter a new operator ID:
	Allows you to display the	• Enter a new operator ID number, up to
	current operator ID number	three (3) digits.
	and/or change to a new	• Press the Enter key.
	operator ID number.
F35	Cassette ID Number	To enter a new cassette ID number:
	Allows you to display the	• Enter a new cassette ID number, up to
	current cassette ID number	two (2) digits.
	and/or change to a new	• Press the Enter key.
	cassette ID number.
F37	Scanner Calibration	• Feed calibration target.
	Allows you to initiate the
	calibration process required
	before scanning documents.
F38	Scanner End-of-Job	none
	Allows you to signal the host
	computer that the last
	document of the job has been
	fed into the transport.

FC-8 A-61003 September 1993