Kodak A-61003 manual FB-8

11.Lift the take-up spool out of the cassette.

12.Place the spool into the film box. Allow approximately

2 to 3 inches (5 to 8 cm) of the film to protrude from under the lid of the box. Close the top of the box securely.

13.Write identification data (i.e., subject,. title, date, job number, etc.) on the film box label. The film is now ready for processing.

To continue filming using the unexposed portion of the roll of film:

14.Obtain an empty take-up spool.

15.Unwind approximately 18 inches (46 cm) of film.

16.Fold back approximately 1/2 inch (1 cm) at the end of the film.

17.Pick up the take-up spool and hold it with the number 1 side up.

18.Insert the folded end of the film into the slot in the take-up spool core.

19.Rotate the spool counterclockwise to secure the film on the spool.

20.Place the take-up spool over the take-up spindle lugs.

21.Slide the release lever toward the battery compartment and hold it in this position.

22.Slowly rotate the take-up spool counterclockwise three full turns to secure the film on the spool. Allow the release lever to return to its normal position.

23.Replace the top cover on the cassette. Press down on the cover latch and turn it clockwise to lock the cover in place.

NOTE: The cassette may now be inserted into the machine and filming may continue.

FB-8 A-61003 September 1993