Kodak A-61003 manual FC-10

	Function Code Name/
Code	Description	Additional Input
F45	Print Test	• Enter the number of the print test you want
	Allows you to test the position	to perform: 1=Print IA test; 2=Prime test;
	and print quality of all	3=Shift test; or 4=standard test.
	document printers installed.	• Press the Enter key.
F46	Print Position	• Press the up arrow key to increment the
	Allows you to specify how far	starting print position by one (1) inch [25 mm];
	from the leading edge of the	or press the down arrow key to decrement the
	document all document	starting print position by one (1) inch [25 mm];
	printers will print.	or press the right arrow key to increment the
		starting print position by one-eighth (0.125)
		inch [3 mm]; or press the left arrow key to
		decrement the starting print position by
		one-eighth (0.125) inch [3 mm];
		• Press the Enter key.
F48	Purge Print Head	none
	Allows you to initiate an
	immediate priming ink spurt.
F49	Purge Frequency	• Enter the number of documents, up to 50,000.
	Allows you to specify how	• Press the Enter key.
	often, in terms of the number
	of documents fed into the
	transport, a priming ink
	spurt is initiated.
F50	Patch Reader 1 On/Off	• Enter the number zero (0) to turn the primary
	Allows you to turn the primary	patch reader OFF; or
	patch reader on or off.	enter the number one (1) to turn the primary
		patch reader ON.
		• Press the Enter key.
F51	Patch Reader 2 On/Off	• Enter the number zero (0) to turn the secondary
	Allows you to turn the	patch reader OFF; or
	secondary patch reader	enter the number one (1) to turn the secondary
	on or off.	patch reader ON.
		• Press the Enter key.

FC-10 A-61003 September 1993