LOADING CASSETTE(S) INTO THE MACHINE
A film cassette can be loaded into either the upper or lower film slot.
1.Open the cassette access door.
2.Swing the drive release lever (green handle) out.
3.Insert film cassette(s).
NOTE: Refer to the label on the inside of the cassette access door for cassette orientation. The display on the film cassette is oriented differently depending upon the film slot being used.
4.Swing the drive release lever back into place.
5.Close the cassette access door.
Whenever a fresh or partial roll of film is loaded into the machine, a leader is automatically made when the cassette access door is closed and the side panel switch has been turned on.
A Please Wait... message will appear in the Status Display while the film leader is being advanced. Once a normal operating display appears, indicating that the leader has been advanced, check the film supply indicators on the control panel to determine if you have enough film to complete the job.
|
