Kodak A-61003 manual OM-11

Code	Operator Message Displayed	Description/Action Required
E292	Lamp failure	Replace the exposure lamps.
		Recalibrate the machine.
E293	Host recovery required	Contact your System Administrator to
		initiate the required action on the
		host system.
E294	Front calibration warning	Perform maintenance/cleaning
		procedures for the Document Scanning
		Array, Image Guides, etc.
		Check the lamps; replace if necessary.
		Recalibrate the machine.
E295	Rear calibration warning	Perform maintenance/cleaning
		procedures for the Document Scanning
		Array, Image Guides, etc.
		Check the lamps; replace if necessary.
		Recalibrate the machine.
E296	Target not seen	Repeat the calibration process using
		a blank target.
		If error repeats, call service.
E297	Document que full	The feeder and transport are stopped,
		and the machine is disabled.
		Transfer images from the image buffer to
		the host system.
		Re-enable the machine.
		Press the Run key to continue.
E298	Calibration required	Enter function code F37 to initiate the
		calibration sequence.
E500	System error	Contact your System Administrator.
E501		A controlled power-down sequence
E502		is required.
E503
E512
E513
E550
E551
E552
E553
E562
E563

A-61003 September 1993 OM-11