Kodak ESP 7200 Series manual Configuring Your Printer, Configuring printer settings

2

Configuring Your Printer

This section explains how to configure or change your printer settings and your wireless network settings.

Configuring printer settings

NOTE: When you first power on the printer, the printer automatically steps you through the process of selecting the Language and Country/Region.

To set or change basic printer settings:

1.Press Home.

2.Press to select Printer Settings, then press OK.

3.Press to select one of the following settings:

•Date and Time*

–Press OK, then press to select Year, Month, Day, Hour, or Minute. Press or to change the values; press OK when you are done.

•Button Sounds

–Press to select On or Off.

•Time to Low Power

–Press to change the time to energy-saving low power (select from 1 to 4 hours in 0.5 hour increments). After the time to low power, the printer goes into a low-power mode.

•DPOF Printing

–Press to select On or Off.

•Language

–Press OK, press to select a language, then press OK.

•Country/Region

–Press OK, press to select a country or region, then press OK.

•Reset All Settings (see Resetting factory defaults, page 65)

NOTE: Resetting factory defaults does not change the date and time, language, or country/region.

4.Press Back to go back to the Main Menu.

* You can also synchronize the printer's date and time to your computer from Home Center Settings under Tools in Home Center Software.

4 www.kodak.com/go/aiosupport