KODAK ESP 7200 Series All-in-One Printer

Setting up an IP address

IMPORTANT: You should only need to set up an IP address for your printer if you are having a problem with connecting. Typically, it is not necessary to set up an IP address. This procedure is for advanced users who know how to obtain the IP address for the printer.

All IP address entries have the following format: 000.000.000.000. Within each three-digit grouping, the number must be right-justified. If an address or subnet mask has only one or two characters between the periods, include one or two leading zeros in front of that number. For example:

The address as it may appear

How to enter the address

in your documentation

in the printer menu

 

 

149.89.138.149

149.089.138.149

 

 

149.2.40.149

149.002.040.149

 

 

For information about obtaining the printer IP address, go to

www.kodak.com/go/inkjetnetworking.

To set up your IP address on the printer:

1.Press Home.

2.Press to select Network Settings, then press OK.

3.Press to select Advanced IP Address Setup, then press OK.

4.Press OK again to continue.

5.Select one of the following, then press OK:

Dynamic (DHCP)

Automatic (Private)

Manual (Static)

6.If you selected Manual (Static), you are prompted to enter an IP address, a Subnet Mask, a Gateway Address, and a DNS Server address. Press OK after each entry. Use the navigation buttons to enter each digit of the numbers.

Consult your Internet service provider or network administrator for more information.

www.kodak.com/go/aiosupport

9

Page 15
Image 15
Kodak ESP 7200 Series manual Setting up an IP address, Dynamic Dhcp Automatic Private Manual Static