Kohler 14/20RESAL manual Generator Set Information Menu, Genset Run Time Menu

Models: 14/20RESAL 14/20RESA

1 72
Download 72 pages 24.65 Kb
Page 39
Image 39
3.12Generator Set Information Menu

3.12Generator Set Information Menu

The generator set model number and serial numbers are displayed. No changes are allowed from this menu.

Model and serial numbers are factory set and should not require changes in the field, except in the event that the controller is being replaced. A personal computer running Kohler SiteTech software is required to enter the generator set model number and serial numbers on a replacement controller. Contact an authorized Kohler distributor/dealer for service.

Genset ---->

Genset M/N:

Information

20RESA

 

Genset S/N:

 

########

 

Controller S/N:

 

########

 

<---- Return

 

tp6804

Figure 3-13 Generator Set Information Menu

3.13 Genset Run Time Menu

The data shown in Figure 3-14 are displayed. No changes are allowed from this menu.

The Next Maintenance menu shows the number of hours of generator set operation until maintenance is required. The estimated date for the next scheduled maintenance is also displayed. The maintenance reminder intervals are based on the engine manufacturer’s recommendation for changing the oil. Refer to Section 5, Scheduled Maintenance, for maintenance instructions.

After changing the oil and performing other recommended maintenance, go to the Overview menu to reset the maintenance timer. See Section 5.2.5 for instructions to reset the maintenance timer.

Genset ---->

Eng Runtime:

 

Run Time

12345.6 h

 

Eng Starts:

 

123456

 

Next Maintenance:

 

150 h or Mar2012

 

<---- Return

 

tp6810

Figure 3-14 Generator Set Run Time Menu

TP-6804 12/11

Section 3 RDC2 Controller Operation 39

Page 39
Image 39
Kohler 14/20RESAL manual Generator Set Information Menu, Genset Run Time Menu