9Specifying management settings
9-18 200/250/350
Specifying management settings Chapter 9

9.5 Specifying the transmission report printing conditions

(Report Settings)

You can specify the printing conditions for the transmission results and ac-
tivity reports.
Settings can be specified for the following.
!
Detail

If “Activity Report” is set to “ON”, the activity report contents can be out-

putted as a CSV file and sent by e-mail to the administrator when the ac-

tivity report is printed. To manage the contents of the activity report as

data, specify the e-mail address of the administrator.

For details on the specifying the e-mail address of the administrator, refer

to the User’s Guide [Copy Operations].

Specifying TX Report settings
1Enter Administrator mode, and then touch [Admin. 1].
2Touch [Report Settings].
Item Description
TX Report Select to print the transmission report sent to single destinations
or broadcast.
ON: Prints regardless of the transmission results.
If TX Fails: Prints only when undeliverable.
OFF: Does not print regardless of the transmission results.
Activity Report Select whether to print the activity report automatically every 50
transmissions.
Utility/Counter
Administrator Management 1
Enter
Account/
User Auth.
Initial
Setting
Admin.Set
Print Lists
Report
Settings
TX Settings RX Settings
Document
Management
100%
Memory
Free