Konica Minolta C10 Scan to E-mail using the Original Glass, Basic Scan to E-mail Operation 107

Place the original document face down on the original glass and align the document on the scales above and to the left of the original glass.

Gently close the ADF cover.

11 Using the * and ) keys, select “ADF”.

" To change the size of the scanned image, press the , key.

For information on changing the size, refer to “Changing the Scanned Image Size” on page 114.

12 Press the Start key.

Scanning starts, and then the scan data is sent to the recipients.

" To stop scanning and stop the transmission, press the Stop/Reset key. A message appears, requesting confirmation to cancel the set- ting. Select “Yes”, and then press the Menu Select key.

" If you want to cancel a scanned document queued for transmission, select “CANCEL RESERV.” from the Function menu. For details, refer to the bizhub C10 Facsimile User's Guide.

" Scan data is not sent directly to the recipient. In addition, images are regarded as having been sent successfully on completion of their transmission to the server.

" If the E-mail could not be sent, a transmission result report can be printed. For details, refer to the bizhub C10 Facsimile User's Guide.

Scan to E-mail using the Original Glass

1

2

Press the Scan key to enter Scan mode. Remove all documents from the ADF.

" If you are using the original glass to scan, do not load any documents into the ADF.

3 Lift to open the ADF cover.

4

5

"

Closing it too quickly may cause the document to move on the original glass.

6 Specify the E-mail address of the recipient in one of the following ways, and then press the Menu Select key.

–Direct input

–Using the one-touch dial key

–Using the speed dial number

–Using the phone book function

Basic Scan to E-mail Operation 107