Konica Minolta C10 manual 116, Changing/Deleting One-Touch Dial Information

" If the one-touch dial key that is pressed is already registered with a recipient, the message “REGISTERED!” appears. Press the Menu Select key, and then press a one-touch dial key with no recipient reg- istered.

5 Enter the name of the one-touch dial to be programmed, and then press the Menu Select key.

"

"

Text up to 20 characters long can be entered for the name.

For details on entering/editing text and the characters that can be entered, refer to “Entering Text” on page 214.

" To cancel programming, press the Cancel/C key. (To cancel program- ming while the name is being entered, press the Menu Select key, and then press the Cancel/C key.)

6 Using the keypad, enter the E-mail address of the recipient, and then press the Menu Select key.

The entered information is programmed with the one-touch dial key, and the message “SELECT REGIST.KEY” appears.

"

"

The fax number can contain a maximum of 50 characters.

For details on entering/editing addresses, refer to “Entering Text” on page 214.

" To cancel programming, press the Cancel/C key. (To cancel program- ming while the address is being entered, press the Menu Select key, and then press the Cancel/C key.)

7 To program another one-touch dial key, press the one-touch dial key, and then repeat the procedure starting from step 5.

OR

To finish the procedure and return to the Scan mode screen, continue pressing the Cancel/C key until the Scan mode screen is displayed.

Changing/Deleting One-Touch Dial Information

The registered one-touch dial information can be corrected.

1 Press the Menu Select key, then the , key three times.

2 Check that the FAX REGISTRATION screen appears, and then press the Menu Select key.

3 Check that the ONE-TOUCH DIAL screen appears, and then press the Menu Select key.

4 Press the one-touch dial key that you want to change or delete.

5 Press the Cancel/C key.

116 Registering Recipients