Konica Minolta C10 manual Replacing the Toner Cartridge 135

15 Carefully close the scanner unit.

" When the scanner unit is closed, the black toner cartridge automatically moves so that it can be replaced. With each press of the TC Change key, the yellow, then magenta toner cartridge moves so that it can be replaced.

16 Press the Stop/Reset key.

The message is erased from the message window, and machine is reset so that it can continue printing.

" If no operation is performed for more than 30 seconds after the scanner unit is closed, the machine is automatically reset so that it can print.

" The machine must complete a calibration cycle (less than 2 min- utes) after a toner cartridge has been replaced. If you open a cover before the machine is reset, the calibration stops, then starts over again after the cover is closed.

Replacing the Toner Cartridge 135