Konica Minolta C10 Name Function Display key, Quality key, Fax key, Scan key, Copy key, 2in1 key

No.	Name	Function
4	Display key	Press to check the status of this machine and the
		specified settings.
		„ Displays a rough estimate of the amount of toner
		remaining.
		„ Displays the total number of pages that have
		been copied, printed and scanned.
		„ Displays the results for fax transmissions and
		receptions.
		„ Prints the machine settings, lists and reports
		related to fax.
		For details, refer to “Checking the Machine Status
		and Settings” on page 19.
5	Quality key	Press to specify the document type to be copied and
		the resolution.
6	Message Win-	„ Displays information such as the media type,
	dow	copy density, and zoom ratio. For details, refer to
		“Display Indications” on page 16.
		„ Displays an error message when an error occurs.
		For details on error messages, refer to “Status,
		Error, and Service Messages” on page 191.
7	Keypad	Enters desired number of copies. Enters fax num-
		bers, E-mail addresses, and names of recipients.
8	Fax key	Press to enter Fax mode. The key lights up in green
		while the machine is in Scan mode. For details, refer
		to the bizhub C10 Facsimile User's Guide.
9	Scan key	Press to enter scan mode. (Scan to E-mail or Scan
		to PC) The key lights up in green while the machine
		is in Scan mode. For details on the Scanner func-
		tions, refer to chapter 7, “Using the Scanner”
10	Copy key	Press to enter Copy mode. The key lights up in
		green while the machine is in Copy mode. For
		details on the Copy functions, refer to chapter 6,
		“Using the Copier”.
11	2in1 key	Press to specify 2in1 copying.
12	Collate key	Press to specify collated copying.

About the Control Panel 13