
" By specifying one TO address and 124 CC addresses, a total of 125 recipients can be specified.
"
6 Enter a title (subject), and then press the Menu Select key.
" If you do not want to specify the subject line, resolution and other set- tings, skip to step 12.
" Use alphanumeric characters (including some symbols) for the title(subject).
Using other characters will corrupt the characters for the
For details on entering/editing text and the characters that can be entered, refer to “Entering
7 Enter the
" To specify more than one CC address, press the Menu Select key to enter the additional addresses. Repeat step 7 until all of the recipients have been specified.
8 After you have finished specifying the addresses for additional recipients, press the Menu Select key.
9 Using the * and ) keys, select the color mode (“GRAY” or “B/W”), and then press the Menu Select key.
" “COLOR” cannot be selected for the scan mode when the ADF is used. In that case, select “GRAY” or “B/W” (black and white).
10 Using the * and ) keys, select the resolution (150 × 150 dpi, 300 × 300 dpi or 600 × 600 dpi), and then press the Menu Select key.
" The 600 × 600 dpi resolution cannot be selected if “GRAY” was selected as the scan mode in step 9.
" To specify detailed settings for the scan mode, such as the data format and compression encoding method, press the , key.
For information on specifying detailed settings, refer to “Changing the Scan Mode Settings” on page 113.
106 | Basic Scan to |