Konica Minolta C10 manual Buzzer Volume, High / LOW / OFF, Initial Mode, On / Onfax / OFF, On/Off

6 BUZZER VOLUME	Setting	HIGH / LOW / OFF
	Select the volume of the sound produced when
	a key is pressed and of the alarm that is
	sounded when an error occurs.
7 INITIAL MODE	Setting	COPY / FAX
	Specify the default mode when the machine is
	turned on or when all settings in the control
	panel return to their default settings.
8 TONER EMPTY STOP	Setting	ON / ON(FAX) / OFF
	Select whether or not printing, copying and fax-
	ing stop when the toner has run out.
	If ON is selected, printing, copying and faxing
	stop when the toner runs out.
	If ON (FAX) is selected, only faxing stops
	when the toner runs out.
	If OFF is selected, printing, copying and faxing
	do not stop when the toner runs out.
9 TONER NEAR EMPTY	Setting	ON/OFF
	When the toner is nearly run out, a warning
	message appears.
10 AUTO CONTINUE	Setting	ON / OFF
	Select whether or not printing continues when a
	size error occurs during printing.
11 CALIBRATION	Setting	ON / OFF
	Select whether or not to perform image stabili-
	zation. If ON is selected, image stabilization is
	started.
12 REMOTE MONITOR	Setting	ON / OFF
	Select whether or not setting remote monitor.
	If ON is selected, technical support can access
	the menu mode.
	If OFF is selected, technical support cannot
	access the menu mode.
	" This setting is for technical support uses.
	Change the setting only when it is
	necessary.

28 Configuration Menu Overview