Konica Minolta C10 manual 182

Symptom	Cause	Solution
With N-up on	Both the printer driver	For N-up on multiple copies, choose
multiple cop-	and the application	Collate only in the printer driver’s Basic
ies, the out-	have been set for col-	Tab. Do not set collation in the applica-
put is	lation.	tion.
incorrect.
Booklet Left	Both the printer driver	For Booklet Left Binding and Booklet
and Right	and the application	Right Binding, choose Collate only in
Binding out-	have been set for col-	the printer driver’s Basic Tab. Do not
put is incor-	lation.	set collation in the application.
rect.
You hear	The machine is not	Place the machine on a flat, hard, level
unusual	level.	surface.
noises.
	The tray is not	Remove the tray that you are printing
	installed correctly.	from and reinsert it completely into the
		machine.
	There is a foreign	Turn off the machine and remove the
	object stuck inside	object. If you cannot remove it, contact
	the machine.	Technical Support.
When copy-	A malfunction may	If a band appears in the copy after
ing or scan-	have occurred while	copying, select a copy density setting
ning with the	paper was being	that is one level darker.
ADF, a band	transferred with the	If a band appears in the image after
appears at	ADF.
		scanning, scan using the original
the end of
		glass.
the image or
paper (5 to 6
mm).
While scan-	Immediately after the	If the image becomes lighter or darker,
ning with the	machine is turned on,	scan using the original glass. In addi-
ADF at 600	the lamp intensity	tion, perform the scan operation after
dpi, the	increases. There-	turning the machine on and lighting the
image has	fore, the image may	lamp for an hour and a half or more.
become	become lighter and
lighter and	the background may
the back-	become darker.
ground has
become
darker.

182 Solving Other Problems