Konica Minolta C10 manual Basic Scan to PC Operation, Scan to PC using the ADF

Press the Start key.

Scanning starts, and then the scan data is saved to the specified folder.

Press the Scan key to enter Scan mode.

Basic Scan to PC Operation

" In order to perform this operation, make sure the TWAIN scanner driver, the printer driver, and LinkMagic (Winidows only) have been installed to your PC.

" When you operate Scan to PC, make sure whether LinkMagic is acti- vated or LinkMagic icon is displayed on notification area.

Scan to PC using the ADF

If the ADF is used, original documents containing multiple pages can be auto- matically scanned.

"

"

"

Do not load original documents that are bound together, for example, with paper clips or staples.

Do not load more than 50 sheets; otherwise an original document mis- feed or damage to the document or machine may occur.

If the original document is not loaded correctly, it may not be fed in straight, or an original document misfeed or damage to the document may occur.

" Do not open the ADF cover while documents loaded into the ADF are being scanned.

1

2 Press + or , to select SCAN TO PC.

3 Make sure that there is no document on the original glass.

4 Stack the document in the ADF document feed tray face up with the first page to be sent on the top of the stack.

5 Adjust the document guides to the document size.

6

" If the specified folder is not created first, the location to save scanned document is specified in “\My Documents\KONICAMINOLTA Link- Magic for bizhub C10\My Data” folder.

" For details of saving and scanning the type of the document, refer to the bizhub C10 Reference Guide on the Drivers and Documentation CD-ROM.

122 Basic Scan to PC Operation